Articles, Blog

NOS Nitrous Plate Kit: How a nitrous oxide plate system works

September 12, 2019


an NOS plate system is easily
identified by the existence of a plate with an integrated spray bar there are fittings at either end they will
accept tuning Jets and feed line connections for fuel or
nitrous these wet kits will have a nitrous solenoid and a fuel solenoid that will deliver
the mixture to the plate that will be installed between the
intake manifold and a carburetor or throttle body assembly fuel and nitrous are introduced at the same
time the additional fuel that will spray to
the bar can be supplied to the plate by tapping into the vehicle’s existing
fuel system or through a separate fuel cell with a
secondary fuel pump with more fuel introduced more air is supplied by the
nitrous and much more power is created during
combustion

2 Comments

  • Reply skinner5fdp July 21, 2012 at 12:11 am

    i have 3 solinoids there from nitros world but it came with a N.O.S. bottle all the solinoids have blue on the top of the bolt that holds it together one is small the other two are big and it says 400 hp on the bottom im wandering if im missing parts for the kit are there supposed to be two more solinoids with red on the bolt?

  • Reply krylon234 September 6, 2013 at 6:51 pm

    could u imagine a plate and port and the same timee, daaym thats faast

  • Leave a Reply